Camecho Vehicle Backup Camera 4 Split Monitor Front View Rear View Camera Auto 18 IR Night Vision Waterproof Aviation 4 Pins Connector LCD Monitor for Trucks RV Trailer Bus
Product Description
7 Inch Split Screen Monitor
- Support 4 channel video input display at the same time
- Connector: 4 pin aviation connector
- Wide range of 12-24V applications
Package Included:
- 1 x 7 inch Car Monitor
- 2 x Aviation 4 Pins type Backup Camera (Rear camera with guide line. Front camera without guide line won't affect viewing)
- 2 x 33ft length cable
- 1 x Dashboard Mounting Bracket
- 1 x Remote Control
6 Display Modes Available
- The screen can be configured to show channels 1/2/3/4 at the same time
- The image displayed on CH1-CH4 is from connector V1-V4 accordingly
- Auto Switch: After correct wiring, the monitor will automatically switch to single channel rear view camera image when reverse gear is pulled
- More settings on the "Menu" remote control: select Brightness settings, rotate picture, contrast, language, etc.
|
|
|
|
|---|---|---|
2 extensions with 4-pin aviation connectorProvide video signal and power in one cable, no need to wire power cable for camera. You can mount the camera anywhere you want.
|
Super Color 18 IR Night Vision
|
IP68 waterproof Reliable Construction
|
|
|
|
|
|---|---|---|
Front View Camera without Guideline
|
Rear View Camera with Guideline
|
Use Remote Control to Switch V1-V4
|
Installation：
1. Monitor :
- The monitor has six color cables(Red / black / blue / white / green / brown ). The red wire connected to positive 12V/24V, black wire to ground.
- If you use one camera as a backup camera, Connect the color cable to 12V/24V positive power accordingly [ Green-CH3, White- CH2 , Blue-CH1, Brown -CH4 ].
- Another camera without guide line could be used as a full time monitor.
2. The package include 2 cameras,
- You could add another 2 cameras and choose cable length as your needs.
- The connector is pins type, please be careful connect it correct and tightly.
- Every connector has interface mark.
3. Use extend cable wiring camera to monitor V1/V2 yellow input. (there has a mark for every channel )
4. Attention: you can set things up from the menu which is accessible only with the remote control.(The battery of CR2025 is not included)
